Facts & Figures
h-index -
i10 index -
Citations -
Issue per year -
No. of volumes -
No. of Issues 1
Published articles 9
Acceptance rate -
Review papers 1
Research papers 4
No. of contributors -
Contributing countries 1

Bio - Materials and Technology

Review process: Bio - Materials and Technology is an international, multidisciplinary / interdisciplinary, peer-reviewed, open-access research journal dedicated to all the aspects of Biomaterials and Biotechnology. At least one peer-review + Editor / Editorial Board member review is applicable for all the research papers submitted (even through conferences). All research papers submitted will be initially screened by the Editorial office for their suitability for the journal. Papers with distant themes / research areas will be directly returned to the authors for publication in other specialized journals. Considered papers will be evaluated for plagiarism through Turnitin or other suitable software for plagiarism / similarity index. A detailed ‘Plagiarism Check Report’ will then be issued / supplied to the corresponding author – asking for a revision of the manuscript. Revised manuscript (free from plagiarism or having similarity index within the acceptable limit) will then be used for peer-review process. Authors will be needed to revise their manuscript taking into account all the comments / suggestions made by the reviewer(s). Final decision is taken by the Editor-in-Chief or Associate Editor(s) for acceptance or rejection of the manuscript. Typically, this process involve revising the manuscript couple of times and may take couple of month time.

Authors of the rejected manuscripts have the right to challenge the Editor’s decision by way of giving suitable explanations, evidences, experimental proofs – for their research findings - in support of their research paper. In such a case, the research paper, reviewer’s comments, and the supporting information provided by the author will be judged by 3 or 5 different Editorial Board Members and finally the decision will be arrived at. Only one such opportunity will be applicable to the author.
All manuscripts will be equally treated with no discrimination based on country of origin, race, nationality, cast, religion, gender and other such points. Highest ethical and moral standards will be followed and maintained by the Editorial office and publishing company.
Guide to Authors: Research papers related to (but not limited to) following areas are suitable:

Biomaterials:

  • Functional Biomaterials and bio-degradable materials
  • Nano-bio-materials
  • Bio-compatible and injectable materials
  • Bio inspired materials and structures, nature inspired materials and structures, systems, and tools – Biomimics; Wood
  • Molecular medicine
  • Bio-therapeutics
  • Ayurvedic and other traditional medicines
  • Vaccines, enzymes, proteins, DNA, RNA,
  • Bio-pesticides, Bio-fertilizers, Bio-insecticide
  • Bio-films, natural polymers, natural organic and inorganic materials, Bio- composites (composite materials made with biomaterials),

Biotechnology:

  • Animal, Plant, Agricultural, Food, Microbial, Pharmaceutical, Marine, and Environmental Biotechnology
  • Bioinformatics and Genetics
  • Biophysics and Bio-chemistry; Biosensors, Bioelectronics
  • Tissue engineering
  • Nanobiotechnology, nano-medicine, regenerative medicine
  • Biofuels, biogas, Bioenergy, Bio-fuel cells
  • Immunology, Cell biology, Virology
  • Fermentation and technology
  • Medical Science, Engineering, and Technology; Medical devices, Targeted drug delivery; Bio-imaging; diseases and treatments
  • Industrial new processes and products; instrumentation, Biosafety, Bioethics, IPR & Entrepreneurship

Research papers will be selected on the basis of the importance of the new knowledge they provide. Novelty and originality of the research work are the prime criteria’s that will be considered for acceptance of the paper. Articles should be in adequately finished form, and should not be deficient in information as to the materials, processes, characterization used.
Form of Papers :
Letters (Priority Communication): Typically 5 printed pages.
Research Papers: Typically less than 10 printed pages
Reviews: No Page Limit.
News and Views: 3 printed pages maximum
Correspondence: 2 printed pages maximum
Comment: 2 printed pages maximum
Reply to comment: 5 printed pages maximum
Perspectives: Typically 2- 3 pages maximum 
Advertisements: Typically 1 page
Submission of Papers: Authors should submit their manuscript as a Word file and a pdf file as an attachment to the Editorial Office (dr.prakashsomani@yahoo.com). After preliminary evaluation of the manuscript about its suitability for Bio - Materials and Technology; a manuscript number will be assigned and communicated to the author. Authors should quote this manuscript number in all further correspondence. Manuscript may subsequently be assigned to the Associate Editor, Editor-in-Chief, or Editorial Board member considering the theme of the paper and corresponding expertise. 
PDF version of the article will be used for peer-review process. After the acceptance of the paper in this journal, the source files such as high resolution files of the images, figures etc. will be requested from authors. All correspondence, including notification of the Editor's decision and requests for revision will be done by e-mail, removing the need for a hard-copy paper trail.
All papers should be submitted in English language only. Submission of a paper implies that it has not been published previously, that it is not under consideration for publication elsewhere, and that if accepted it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the publisher.
English Language: Manuscripts should be proof-read and have English language errors corrected before submission. Papers written in poor language will be returned back to authors for their improvement. Such things may cause delay in the Editorial process and is not good for Authors own benefit.
Manuscript Preparation:
General: Manuscripts must be word processed, single-spaced with wide margins. The corresponding author should be identified by * and give contact details (fax number and e-mail address). Full postal addresses and affiliations must be given for all coauthors. The Editors reserve the right to adjust style to certain standards for uniformity.
Abstract: An Abstract should be provided for all papers (i.e. full papers, Reviews and also for Letters). An Abstract is not required for a comment on the paper previously published in this journal.
Abstract should present important and new findings in the paper. Fancy words, quotes by other people, mathematical equation, reference to figures presented in the paper etc. should be avoided. However, a reference can be made to a previously published paper of the same author or another author (only in case when it is very important).
Body Text: Follow this order while preparing manuscripts: Title (should be as brief as possible, should not contain abbreviations – either spell out or remove), Authors, Affiliations, Abstract, Keywords, Main text (Introduction, Experimental, and Results and Discussion), Acknowledgements, References, Authors Biography.
Figures and tables should be embedded at an appropriate place in the text along with their captions. The paper should contain a detailed technical description of methods used when such methods are new.
Sections: Sections should be given numbers with subsections numbered using the decimal system. For Example :
3. Experimental
3.1 Sample preparation
3.1.1 Sample modification
Roman numerals are not used. The Editorial office reserves the right to combine sections when subdivisions have been used to excess.
Units: The SI system should be used for all scientific and technical data.
References: All publications cited in the text should be presented in a list of references following the text of the manuscript. All references must be archival. Web pagers, private communications, unpublished results, etc. should also be given in the Reference section. Cite references in the text by a number in square brackets on the line (e.g. Somani et al. [1] have shown that). The full reference should be given in a numerical list at the end of the paper. The restriction for number of references for different types of papers is as follows :
Use the following examples for guidance:
Journal Article:
[1] S. Iijima, ‘Carbon Nanotubes’, Nature 354 (1991) 56.
Books:
[1] J. M. Ziman, Principles of the Theory of Solids, Cambridge University Press, Second Edition (1972) 100 – 106.
Chapters in Edited Books:
[1] J. R. Dahn, A. K. Sleigh, H. Shi, B. M. Way, W. J. Weydanz, J. N. Reimers, Q. Zhong, U. V. Sacken, “Carbons and Graphite as Substitutes for the Lithium Anode”, Chapter 1 in “Lithium Batteries : New Materials, Developments and Perspectives”, Industrial Chemistry Library, Vol. 5, Elsevier (1994) 1 – 48.
Papers in Conference proceedings:
[1] S. P. Somani, “Proton Exchange Membrane Fuel Cell with Multiwalled Carbon Nanotube Based Electrodes”, Extended Abstract Book, Fourth International Conference on Molecular Electronics and Bioelectronics (MBE-4)”, University of Tokyo, Japan, 14- 16 March 2007, 75.
Report:
[1] P. R. Somani, “Bulk synthesis of carbon nanomaterials”, Applied Science Innovations Pvt. Ltd., India (1970).
Thesis:
[1] S. P. Somani, “Carbon Nanotubes: Synthesis, Characterization and their application in organic solar cells, field electron emission devices and polymer electrolyte membrane Fuel Cells”, Chubu University, Japan, Ph. D. thesis, (2007).
Patent:
[1] U. B. Sonawane, Process for producing carbon nanotubes. US patent no. 123456 (1995).
IMPORTANT NOTES:
List all authors in each reference. Give the names of all authors and the reference should be complete. Do not use et. al.
Give each reference a different number, Do not use 14 a. b. c etc.
Illustrations:
General: Schematics, diagrams, micrographs, charts, and photographs are all to be referred to as ‘Figures’, and should be numbered consecutively in the order to which they are referred. High resolution figures should be embedded at the appropriate places in the text, with captions placed immediately above, or immediately below the figure. Preferred Image Formats: For the production of your paper we may require high- resolution graphic files in one of the preferred formats, JPG, TIFF. If the submitted electronic artwork is not of sufficient reproducibility, good contrast and high resolution, we will contact you and in such a case, you will be requested to send the original artwork.
Line Drawings: All lettering, graph lines and points on graphs should be sufficiently large and bold to permit reproduction when the diagram has been reduced to a size suitable for inclusion in the journal. Do not use any type of shading on computer generated illustrations.
Photographs: Photographs should only be included where they are essential and must be supplied as they are to be reproduced (e.g. black and white or colour). Micrographs must have a clear scale mark in one corner.
Tables: Tables should be numbered consecutively in the order to which they are referred. Tables should be included at the appropriate point in the text. Tables should not duplicate results presented elsewhere in the manuscript, (e.g. in graphs).
Supplementary Data: Videos (maximum 15 minutes duration) that supplement the results and experimental methods presented in the paper are welcome. Such videos will be uploaded on the journals youtube channel and will be made available to readers.
Letters and Reviews: Letters should not be more than five printed pages (all inclusive). They should include no more than seven tables and figures combined. The figures should be provided in a form suitable for reproduction and should be inserted at appropriate places. Letters section may be used to (a) report research results of special significance and importance, (b) comment on papers previously published in the journal. There are almost no page and size restrictions on the Reviews. However, Authors are advised to consult with the Editorial Office before submitting Review articles.
Proofs: Electronic proofs (PDF format) of all manuscripts will be sent as an e-mail attachment to the submitting/corresponding author. Corrections should be returned within 48 hours by e-mail. Corrections should be restricted to typesetting errors. Please note that authors are urged to check their proofs carefully before return, since the inclusion of late corrections cannot be guaranteed.
Authors who do not yet have the facility for reading pdf files can download the relevant software from the Adobe website at : http://www.adobe.com/products/acrobat/distribute.html
Reprints: Reprints of the paper in the printed form can be purchased at a nominal cost of US $ 5 / reprint (Postage and Tax apply additionally).
Copyright: All authors must sign the ‘Transfer of Copyright’ agreement before the article can be published. Authors should send such agreement either by e-mail (scanned copy) or by postal mail. This transfer agreement enables “Applied Science Innovations Pvt. Ltd., India” to protect the copyrighted material for the authors, but does not relinquish the author's proprietary rights. The copyright transfer covers the exclusive rights to reproduce and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of similar nature and translations. This includes the right to adapt the article for use in conjunction with computer systems and programs, including reproduction or publication in machine-readable form and incorporation in retrieval systems. Authors are responsible for obtaining from the copyright holder’s permission to reproduce any figures for which copyright exists. Company reserves the right to go for publication of the article, in case, it did not receive ‘Transfer of Copyright Agreement’ within a reasonable period of time after acceptance of the article. In such a case, company will assume that by submitting the article for publication in this journal, Author (s) have agreed to and have transferred the copyright of the paper in the name of the company (a MUST condition for consideration of publication in this journal).
Enquiries : For any specific enquiry, Please contact: dr.prakashsomani@yahoo.com